Cisco Trolling Motor Stabilizer Mount

The Cisco Trolling Motor Stabilizer Mount keeps a bow-mount trolling motor arm secure and controlled while you run between spots, helping bass, walleye, and musky anglers cut down on bounce, movement, and deck clutter. Its adjustable layout fits a wide range of boat setups by letting you fine-tune height, angle, and radial position for a precise fit. The outer stabilizer tube slides along the solid aluminum rod to match the exact installation height and rotates 360 degrees so the trolling motor arm settles cleanly into the synthetic V-Channel. After vertical and radial adjustments are set, two set screws lock the unit in place. The arm also adjusts from 0 to 180 degrees and uses a pressure-sensitive clamp that stays put while supporting the trolling motor arm but moves when you apply enough pressure, so you can lay the mount down for storage after removing the motor and raise it back into position when it is time to move. Small models adjust from 6 in. to 8 in., Medium models adjust from 8 in. to 12 in., and Large models adjust from 12 in. to 17 in., giving anglers a secure, customizable trolling motor support for a cleaner run across rough water.

• Adjustable height options include Small 6 in. to 8 in., Medium 8 in. to 12 in., and Large 12 in. to 17 in.
• Outer stabilizer tube rotates 360 degrees and slides along the aluminum rod for exact vertical and radial positioning
• Arm adjusts from 0 to 180 degrees and holds the trolling motor arm in a synthetic V-Channel
• Pressure-sensitive clamp allows quick lay-down storage and locks back into place for running
• Manufacturer's lifetime warranty

Made in the USA