The Anchor Wizard Low-Profile Kayak Anchoring System boasts stunning ease of use in this complete kayak anchoring system with a revolutionary low profile. Fish away without fighting the wind, dealing with wet hands, and manually yanking up your anchor. This convenient tool utilizes a hand crank and stores 40 ft of 1/8 inch cord that will attach to your kayak anchor. Made of durable precision cast 319 Aluminum, and suitable for both fresh and saltwater.
To drop your anchor, turn the handle backward (counterclockwise) to free-spool release (or keep control over the speed by keeping a hand on the crank and moving the handle back and forth.) To lock the spool, crank the handle forward (clockwise) until it stops. To take the line back in the spool, keep forward cranking the handle until your anchor is safely out of the water and aboard your kayak, sliding into the flanged nosepiece tube.
- Low profile
- Perfect for anchoring your kayak without wet hands or tangled ropes
- Free-fall operation controlled by a turn of the handle
- Precision cast 319 aluminum
- Fresh and salt water
- Qty. per Pack: 1
The Anchor Wizard Low-Profile Kayak Anchoring System is made in the U.S.A.
Works fine, but stay with a 6-8 lb anchor only. It does not have enough torque for anything heavier. Plus, you are mounting it to plastic (if you are using a kayak) and you'll gradually flex the … Read More
Works fine, but stay with a 6-8 lb anchor only. It does not have enough torque for anything heavier. Plus, you are mounting it to plastic (if you are using a kayak) and you'll gradually flex the plastic and tear it. I suggest you pull the anchor up by hand and just use the crank/spool as a ' line holding' system.