This FishUSA Carpet Graphic is specially designed for carpeted boat decks! FishUSA boat carpet decals stick well to boat carpets with its Ultra High Tack adhesive film, while 3M GRIP slip-resistant laminate resists wear and tear in high-traffic areas. What a neat way to rep "America's Tackle Shop" and make your boat look like the pros! Deck yours out with a durable FishUSA Boat Carpet Graphic!
- Premium 3M GRIP textured laminate for ultimate slip resistance and durability
- Premium Ultra High Tack Adhesive tacks well to carpet
- Simple, smooth, contour outline due to the toughness of the film – plus it helps make the decal stronger
- Dimensions: Approx. 18 x 4 7/8 in.
- Qty per pack: 1
How to Install the FishUSA Carpet Graphic:
Before installing, make sure the carpet/surface is dry. If the surface is wet, it may cause the graphic to fail prematurely. Vacuuming the surface is recommended. Recommended minimum installation temperature is 50 degrees F.
- Step 1: Place the graphic where you want. Find the middle of the decal. Place a single strip of masking or painter's tape across the middle vertically.
- Step 2: Peel half the decal back and cut out the backing paper.
- Step 3: Lay this half of the decal back down and press firmly on the decal.
- Step 4: Remove the masking/painter's tape carefully. Lift the other half, remove the backing, and lay it down, applying firm pressure. Go over the edges twice.
- Step 5: For extra pressure, step on the entire graphic in different areas and edges for 2-3 seconds at a time.