Cisco Sure-Lok Electronics Mount
The Cisco Sure-Lok Electronics Mount is an universal aluminum mount for most GPS, fishfinders, chartplotters, and VHF radios. The Sure-Lok series uses a cam lock mounting system to secure your electronics unlike any other mount. This mount is so sturdy and well built, Cisco guarantees the Sure-Lok Electronics Mount won't move even in the roughest of conditions.
- Sure-Lok mounts ensure electronics stay where you need them
- Fully adjustable models will adjust to any angle by actuating the padded lever to reposition the unit for viewing from all angles
- Short and tall tilt models stay stationary at the base and only allows the electronics unit to be adjusted on the vertical axis
- Manufacturer's limited lifetime warranty
- Qty. per Pack: 1
The Cisco Sure-Lok Electronics Mount is made in the U.S.A.
|Model||Base Dimensions (in.)||Overall Unit Height (in.)||Lowest Point Height (in.)||Top Plate Width (in.)|
|Fully adjustable||3 x 4||6||4||7|
|Short Tilt Only||3 x 4||4||4||7|
|Tall Tilt Only||3 x 4||7||4||7|
Ratings & Reviews
The Best Electronics Mount Out There
This is the second one of these I have purchased, and I simply won't put my electronics on any other mount. They simply will NOT move on this unit when installed properly. I have both a 12" and 9" unit installed, and the range of motion, location of holes, and ease of installation make this unit a winner for me. If you have smaller units, you may be able to get by with one of the competitor's mounts, but for the larger screens, I simply would not trust them to anything other than this Cisco mount. The only knock on this product is that they DO NOT include the screws/bolts you need to mount it to your boat, so you will need to purchase them after-market. Other than that, a near-perfect product that does exactly what it was designed for!
Simply the Best Out There
by Angler Roy
I use these and I recommend them to my friends. They are rock solid. They do not move out of position even when the boat navigates rough water. I have been using one for something like 10 years or so and it still looks and works like brand new. Really, I can't think of anything you could do to improve on it.
by Joseph T
At first I was skeptical about this mount. after install and the first time on the water I am getting a second mount for the bow to replace the Ram. These mounts are rock solid. They are also easy to remove so I can keep it safe.
Got tired of the Ram mount not staying upright in rough water. Decided to pay the extra for a mount that is supposed to hold steady regardless. I wasn't disappointed. First trip out was bouncing through 3-4 foot waves and this mount didn't move! I would have had to been pushing the Ram back into position every 30 seconds but with this mount, my electronics weren't of concern.
<br>Mounting was a breeze and the thumb screws make it easy to remove the unit if needed.