Free shipping on all orders over $50
Clam Ice Auger Drill Conversion Kit
Clam Ice Auger Drill Conversion Kit
Click to expand
Clam Ice Auger Drill Conversion Kit
Similar ProductsBack to top
Jiffy Stealth STX Replacement Ice Drill/Auger Blade Kit
Jiffy Stealth STX Replacement Ice D...
(4)
The Jiffy Stealth STX Replacement Ice Drill/Auger Blade Kit includes a single serrated main blade, two smaller side blades with four nuts and bolts. STX blades feature a baked on, environmentally-friendly finish to protect the blade while the serrations provide a faster, smoother cut. Jiffy Stealth STX Replacement Ice Drill/Auger Blade Kit fits all Jiffy Ice Drill/Auger originally outfitted with STX blades.The Jiffy Stealth STX Replacement Ice Drill/Auger Blade Kit is made in the U.S.A.
$74.99 - $79.99
StrikeMaster Cordless Ice Drill Adapter
StrikeMaster Cordless Ice Drill Ada...
(2)
The StrikeMaster Cordless Ice Drill Adapter is one solid piece, constructed from stainless steel. This adapter is only to be used with a 18-volt or higher power drill (sold separately).
$17.99
Eskimo Quantum Hand Auger Replacement Blades
Eskimo Quantum Hand Auger Replaceme...
(4)
These are the Quantum Replacement Blades for Eskimo Standard Hand Ice Augers. These blades are made of high quality steel and hold an edge very well. Mounting hardware is included. Each package contains two blades and hardware.
$21.99 - $23.99
Eskimo Hand Ice Auger Blade Protectors
Eskimo Hand Ice Auger Blade Protectors
(3)
These are the Blade Protectors for Eskimo Standard Hand Ice Augers. Eskimo Hand Ice Auger Blade Protectors are designed to fit over the Quantum blades. These blade guards are made of high-impact plastic and feature a strap for securing to the auger. A simple design that protects the blades from damage and you from the blades. Eskimo Hand Ice Auger Blade Protectors are made in the U.S.A.
$12.99
Description

The Clam Ice Auger Drill Conversion Kit allows anglers to use an 18-volt cordless drill (sold separately) as the sole power source to drill holes in the ice. You now even have the ability to use your drill without taking the chuck off! It is recommended to use a high-torque 18-volt lithium battery-powered drill. Extremely lightweight and portable, the Clam Ice Auger Drill Conversion Kit will change ice fishing for the better!

Full Product Details

The Clam Ice Auger Drill Conversion Kit allows anglers to use an 18-volt cordless drill (sold separately) as the sole power source to drill holes in the ice. You now even have the ability to use your drill without taking the chuck off! It is recommended to use a high-torque 18-volt lithium battery-powered drill. Extremely lightweight and portable, the Clam Ice Auger Drill Conversion Kit will change ice fishing for the better!

  • Anodized aluminum frame/handle/plate
  • Rubber-dipped handles and trigger for easier handling and use
  • Taller upright bracket to accommodate more drill types
  • Includes all hardware to mount your drill
  • Lightweight and portable
  • Works with most current 18-volt 1/2 inch drive cordless drills
2
(3 Reviews)
of customers would recommend this product.66%

Customer Reviews
withy
a must have product 
Comments: the drill plate is awesome. I have a 18 volt Milwaukee on this plate cuts through 22 inches of ice like butter. I have seen Electric augers other types of drill adapters this is the only way to go, this is the real deal.was on the ice a guy that had a gas auger , I drilled two holes before he got it started.I have only seen it work with a 5 inch and a 6 inch auger .have never tested it to see exactly how many holes I could drill. on one charge but know for a fact I have drilled 25 and still had battery left. once again great product.
Michigan
moonfire
good  
Pros: cuts faster then hand auger
Cons: cordless battery life
Best Uses: ice fishing
Comments: Keep in mind that i have a 8in auger and that is well beyond its specs 6inch max When you use use in 1st gear only make sure when mount the drill it is straight with shafts robs power if you don't most importantly....lift drill a lot and clean out hole a lot when drilling save battery a lot ..if you hog on it in deep ice you only get like 3 holes cus the battery will shutdown if you drill is old and beat up it will not work to good same for batteries if there newish they work great if there not they will not turn the drill well keep in mind I am using a 8 inch auger and it says to use no bigger then a 6 so a 3,4,5,6 would probably cut double the holes and work great 8 in auger is all I have
Mayville mi
DB
not what it seems
Pros:
Cons:
Best Uses:
Comments: I went through a Dewalt and Milwaukee before I realize you will need an awfully expensive drill to get your auger through the ice any 18 volt drill I don't think so
Questions & AnswersBack to top
Ask a Question
No questions have been asked about this item. Be the first!
Is this the latest generation (4th gen) of the Clam Plate (Model #: 9935) that can be used with or without the removing the drill's chuck? Or is it the pre-2015 model that requires the drill chuck be removed?
December 22, 2015
Chadx
Bozeman, MT
  -   (1) / (0) :
These are the new Model #: 9935 units as the old ones are no longer available.
December 22, 2015
FishUSA StaffProfessional Angler in 
Fairview, PA
This Is the the 4th generation Conversion kit Model # 9935.
December 22, 2015
FishUSA StaffProfessional Angler in 
Fairview, PA