Free shipping on all orders over $30
Refine Your Selection
Departments
Rod Holders
Brand
Type
Capacity
Material
Price
Rating
Walleye: Rod Holders(41)
Sort: 
Show: 
View: 
Big Jon Quik-Draw Rod Holders
The Big Jon Quik-Draw Rod Holders allow you to remove your fishing rod in less time than a standard rod holder. These holders are made for tournament anglers who need a competitive edge to give them the upper hand. The rod is held secure while trolling, and the moment a fish is on, you just lift the rod and the handle will quickly clear the holder. The Big Jon Quik-Draw Rod Holders have the same base as Big Jon's Multi-Axis Rod Holders so you can adjust the horizontal and vertical axis with just...
$149.95 - $599.95
Big Jon Mark Martin Universal Rod Holder
(1)
The Big Jon Mark Martin Universal Rod Holder was developed when Big Jon and professional walleye fisherman Mark Martin joined forces to produce a rod holder that works with virtually any style fishing rod at an affordable price. It will hold trolling, spinning, baitcasting, and spin casting rods with ease. This holder features the "One Hand Operation" design that is also featured in Big Jon's multi-set rod holders. If you are looking for a durable, easy to operate, universal rod holder, then the...
$34.95
Big Jon Ratcheting Rod Holders
The Big Jon Ratcheting Rod Holders are popular rod holders for use with diving disks. These holders are easy to use and you can adjust them to any of seven positive locking positions with a locking latch pin. These models of rod holders "Ratchets" to the vertical position when you pick up your diver rod. No more reaching over the side of the boat when a fish is on. All the Big Jon Ratcheting Rod Holders come with a standard 4" x 4" mounting base and the dual, triple, and quad models are set on a...
$129.95 - $499.95
Big Jon Multi-Axis ll Rod Holders
The Big Jon Multi-Axis ll Rod Holders allow you the ability to adjust the angle and the direction of the holders with just one hand and no tools. The angle of the Big Jon Multi-Axis ll Rod Holders can be adjusted by holding the rod holder tube near the base and pulling it away from the upright base. Then rotate it to the desired angle and release it to lock it into the nearest hole. The direction can be adjusted by holding the rod tube and lifting and rotating the rod holder until you reach the ...
$129.95 - $499.95
Bert's Custom Tackle Swivel Rod Holder Trees
Bert's Custom Tackle Swivel Rod Holder Trees hold 3 rods of any length with an additional rod or net holder on the top. Bert's Rod Holder Trees swivel 360º and lock in four 90º positions. Swivel Rod Holder Trees can be mounted in as small as a 6" Bert's Track System (sold separately). Bert's Swivel Tree Rod Holders are constructed of stainless steel and anodized aluminum.
$239.95 - $353.95
Bert's Custom Tackle Single Track System
(1)
The Bert's Custom Tackle Single Track System is an anodized aluminum track that can be mounted to any flat surface on your boat. Bert's Track System provides flexibility in adding and changing Bert's rod holders, downrigger bases, step pads, boating accessories and more! Berts Custom Tackle Track System is easy to install and includes mounting instructions, end caps, and hardware.
$33.95 - $124.95
Bert's Custom Tackle Ratcheting Rod Holders
(2)
Bert's Custom Tackle Ratcheting Rod Holders are the ultimate rod holders for dipsy rods, board rods, downrigger rods and reef rods. Bert's rod holders have five ratcheting positions with optional five locking positions, plus a gimbal pin that provides anti-twist for gimbal rods. Bert's Ratcheting Rod Holders are constructed of stainless steel and anodized aluminum.
$79.95
Bert's Custom Tackle Ratcheting Plastic Rod Holder
(1)
The Bert's Custom Tackle Ratcheting Plastic Rod Holder allows you to fine tune your rod presentation with five ratcheting vertical positions and eight ratcheting horizontal positions. This adjustable plastic rod holder is constructed of tough Lexan. The Bert's Ratcheting Plastic Rod Holder can mount in a Bert's Track System (sold separately) vertically or horizontally, or you can utilize the four through-bolt holes to mount directly to any surface.
$47.95
Bert's Custom Tackle Pro Series Rod Cradle w/Riser
(2)
The Bert's Custom Tackle Pro Series Rod Cradle w/Riser is built to accommodate bait casting and trolling rod and reel combos. This Berts cradle rod holder features a lever-lock heavy duty cradle style holder. The Bert's Custom Tackle Pro Series Rod Cradle comes with an anodized aluminum 6" riser or a 10" riser in a satin finish.
$42.95 - $44.95
Bert's Custom Tackle Cap Kit for Rod Holder
The Bert's Custom Tackle Cap Kit for Rod Holder will fit all of Bert's tube style rod holders, as well as other standard 2" rod holders. Bert's rod holder caps are made of quality black plastic. The Bert's Custom Tackle Cap Kit includes 2 caps per pack.
$8.95
Cannon Downrigger Mount Rod Holder - Silver
The Cannon Downrigger Mount Rod Holder is a dual axis rod holder that mounts between the mounting base and swivel base of your Cannon downrigger for ultimate rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Rotates a full 360° for added versatility. Compatible with all Cannon downriggers (excluding Mini-Troll). These Cannon Rod Holders are 10" in length.
$249.95
Cannon Track Mount Adjustable Rod Holders
Cannon Track Mount Adjustable Rod Holders feature 6 up and down locking positions, a pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. The Cannon single axis adjustable rod holder delivers 90º of side-to-side rotation. The Cannon dual axis adjustable rod holder delivers 360º of rotation. These Track Mount Rod Holders are 10" in length.
$79.95 - $104.95
Cannon Adjustable Rod Holders
Cannon Adjustable Rod Holders are single axis rod holders that provide 6 up and down locking positions, and delivers 90º of side-to-side rotation. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. The Cannon Adjustable single axis rod holder with rail mount version fits round or square rails from 3/4" to 1 1/4"; perfect for boats with rails. The single axis rod holder wit...
$94.95 - $99.95
Tite-Lok Sure-Set Rod Holder with Plate Mount (5622)
(1)
The Tite-Lok Sure-Set Rod Holder with Plate Mount (Model 5622) features the 5620 series tube type rod holder hinges back for quick follow through when setting the hook and the 5602 Plate Mount. The tube measures 10-1/2" deep and will accept standard rod handles. Like all other Tite Lok rod holders, the 5620 utilizes the Pin-Lok System. The Sure Set Plate Mount measures 2-1/4" by 2-1/4" and comes with a black protective boot. Mount these all around your boat and you can instantly move any accesso...
$39.95
Tite-Lok Flush Mount Rod Holder (5693)
The Tite-Lok Flush Mount Rod Holder Model 5693 is made to mount below the deck. The 9" deep tube with 3" by 3-1/4" plate is installed with an attractive plastic outer boot and inner liner giving a clean stylish trim to the quality anodized finish. The extra heavy construction makes the Tite Lok Flush Mount Rod Holder ideal for downrigger or big water fishing. A gimbal support keeps the rod handle from penetrating too deeply.
$32.95
Tite-Lok Rail Mount Rod Holder (5716)
(2)
The Tite-Lok Rail Mount Rod Holder Model 5716 features the 5710 series tube style rod holder that adjusts and locks into a full range of positions from vertical to horizontal, and the 5606 rail mount that allows the rod holder to be removed when not in use. The Tite-Lok Rod Holder tube measures 10-1/2" deep and will accept standard rod handles. Ideal for planer board, outrigger and downrigger fishing. The Rail Mount fits square or round rails up to 1-1/4". Mounting screw, allen wrench, and 4 bol...
$54.95
Scotty Model 244 Flush Deck Mounting Bracket
The Scotty Model 244 Flush Deck Mounting Bracket is for use with all Scotty post mount rod holders and accessories. The sealed base makes it great for water tight applications, such as kayak decks. The splash cover keeps water and other debris out of the mounting bracket. The Scotty Model 244 Flush Deck Mounting Bracket measures 4" x 2" x 2". Mounting hardware is not included. Black in color.
$9.95
Cannon Front Mount Dual Rod Holder
(1)
The Cannon Front Mount Dual Rod Holder fits all Cannon Downriggers with a 1 5/16" diameter boom, including telescopic booms. Each rod holder is independently adjustable and features a gimbal and drain hole. Comes with two aluminum tube clamps and a dual mounting bracket. This rod holder features heavy duty plastic construction and is Cannon part number 2450163.
$54.95
Big Jon 4 in. Mounting Plate
(5)
The Big Jon 4"x4" Mounting Plate is a precision machined aluminum mounting plate that accepts all Big Jon products with 4" x 4" bases. This base comes with four 3/4" stainless steel hold down knobs. The Big Jon 4"x4" Mounting Plate is Big Jon model MP5004 and is made in the U.S.A.
$29.95
Big Jon Pedestal Mount Quad Multi-Axis Rod Holders
The Big Jon Multi-Axis Rod Holder adjusts to 9 positive locking positions and rotates with one hand for the ultimate in versatility. Multi-Axis Rod Holders feature heavy duty, machined aluminum construction with an anodized finish for complete corrosion resistance in freshwater or salt. The pedestal base also features heavy-duty, aluminum construction. The top base that the rod holders are mounted to, measures 2" wide. The pedestal is 2" high. The pedestals mounting base plate measures 4" by 4"....
$299.95
Big Jon Pedestal Mount Dual Multi-Axis Rod Holders
The Big Jon Multi-Axis Rod Holder adjusts to 9 positive locking positions and rotates with one hand for the ultimate in versatility. Multi-Axis Rod Holders feature heavy duty, machined aluminum construction with an anodized finish for complete corrosion resistance in freshwater or salt. The pedestal base also features heavy-duty, aluminum construction. The top base that the rod holders are mounted to, measures 2" wide. The pedestal is 2" high. The pedestals mounting base plate measures 4" by 4"....
$179.95
Big Jon Single Multi-Axis Rod Holder
The Big Jon Single Multi-Axis Rod Holder adjusts to 9 positive locking positions with one hand for the ultimate in versatility. Multi-Axis Rod Holders feature heavy duty, machined aluminum construction with an anodized finish for complete corrosion resistance in freshwater or salt. The Big Jon Single Multi-Axis Rod Holder comes with mounting hardware and instructions. These rod holders are available in silver (Big Jon Model RH00360) or in gold (Big Jon Model RH10360) anodized finishes.
$74.95
Big Jon Pedestal Mount Quad Heavy-Duty Rod Holders
The Big Jon Pedestal Mount Quad Heavy-Duty Rod Holder features four of the Heavy-Duty Rod Holders mounted on a pedestal base. The Heavy-Duty Rod Holders adjusts to 7 positive locking positions. To change position, you pull the spring-loaded locking pin, adjust the rod holder angle and release the pin. Easy position changes are possible on the water with out tools.
$499.95
Big Jon Pedestal Mount Triple Heavy-Duty Rod Holders
(1)
The Big Jon Pedestal Mount Triple Heavy-Duty Rod Holder features three of the Heavy-Duty Rod Holders mounted on a pedestal base. The Heavy-Duty Rod Holders adjusts to 7 positive locking positions. To change position, you pull the spring-loaded locking pin, adjust the rod holder angle and release the pin. Easy position changes are possible on the water with out tools.
$399.95
Big Jon Pedestal Mount Dual Heavy-Duty Rod Holders
The Big Jon Pedestal Mount Dual Heavy-Duty Rod Holder features two of the Heavy-Duty Rod Holders mounted on a pedestal base. The Heavy-Duty Rod Holders adjusts to 7 positive locking positions. To change position, you pull the spring-loaded locking pin, adjust the rod holder angle and release the pin. Easy position changes are possible on the water with out tools. These extra thick walled aluminium rod holders feature 9" tubes and are perfect for heavy-duty freshwater and saltwater fishing.
$259.95
Big Jon Single Heavy-Duty Rod Holder with Slim-Line Base
(1)
The Big Jon Single Heavy-Duty Rod Holder with Slim-Line Base is just that - a heavy duty holder which will give you years of use. This rod holder adjusts to seven positive locking positions, with a spring loaded latch pin. It features an extra heavy duty rod holder, a slim-line 2.5" by 4" mounting base, and a rubber end cap to protect your rods when putting them into or taking them out of the holder. These rod holders are 13" tall (including base) and the rod holder tube is 8.75" deep.
$100.00 - $129.95
Big Jon Multi-Set Rod Holder Trees
The Big Jon Multi-Set Rod Holder Trees feature your choice of three or four Multi-Set Rod Holders mounted on a 36 in. mast with a heavy-duty aluminum base. The mast can be rotated 90 degrees to 4 locking positions and can also be removed from the base for easy storage. The mast features the same heavy aluminum construction as all Big Jon components.
$260.95 - $349.95
Big Jon Pedestal Mount Quad Multi-Set Rod Holders
The Big Jon Pedestal Mount Quad Multi-Set Rod Holders feature four of the Multi-Set Rod Holders mounted on a pedestal base. The Multi-Set Rod Holders adjusts to 9 positive locking positions with one hand. To change position, you pull out on the holder tube at the the spring loaded dome shaped base, rotating the unit until it locks into another position. Easy, positive, one handed position changes are possible on the water, with out tools. These thick walled aluminium rod holders feature a 9.5" t...
$279.95
Big Jon Pedestal Mount Triple Multi-Set Rod Holders
(1)
The Big Jon Pedestal Mount Triple Multi-Set Rod Holders feature three of the Multi-Set Rod Holders mounted on a pedestal base.
$209.95
Big Jon Pedestal Mount Dual Multi-Set Rod Holders
(2)
The Big Jon Pedestal Mount Dual Multi-Set Rod Holders feature two of the Multi-Set Rod Holders mounted on a pedestal base.
$149.95
Big Jon Multi-Set Rod Holder/Ball Cradle Set
The Big Jon Multi-Set Rod Holder/Ball Cradle Set includes two Model RH00435 Multi-Set Rod Holders and a downrigger cannonball weight cradle. The Big Jon Multi-Set Rod Holders adjusts to none positive locking positions with one hand. These rod holders feature a machined base designed to fit the downrigger ball cradle on Big Jon Downriggers. The Big Jon Multi-Set Rod Holder/Ball Cradle Set comes complete with mounting hardware and instructions. These rod holders have the same dimensions as the sta...
$204.95
Big Jon Single Ball Cradle Multi-Set Rod Holder
The Big Jon Single Ball Cradle Multi-Set Rod Holder adjusts to 9 positive locking positions with one hand. These rod holders feature a machined base designed to fit the downrigger ball cradle on Big Jon Downriggers. The Big Jon Single Ball Cradle Multi-Set Rod Holder comes complete with mounting hardware and instructions. The Big Jon Single Ball Cradle Multi-Set Rod Holders have the same dimensions as the standard Multi-Set Rod Holders.
$79.95
Tite-Lok Triple Rod Holder with Plate Mount (5760)
(3)
The Tite-Lok Triple Rod Holder with Plate Mount features three rod holders with adjustable angle settings and rotation to twelve positions. This will give you the ability to fine tune the rod placement on your boat. The included Plate Mount allows for the entire setup to be removed when not in use. Each rod holder tube is approximatley 10 3/4" deep and has an outside diameter of 2". The plate measures 4 3/16" by 3 3/16" and is 1/4" deep.
$144.95
Tite-Lok Multi-Lok Rod Holder with Plate Mount (5712)
(15)
The Tite-Lok Multi-Lok Rod Holder features adjustable angle settings and rotates to twelve positions. This will give you the ability to fine tune the rod placement on your boat. The included Plate Mount allows for the rod holder to be removed when not in use. The rod holder tube is approximatley 10 3/4" deep and has an outside diameter of 2". The plate measures 2 5/16" square and is 3/8" deep.
$42.95
Down-East Rod Holders
(14)
Down-East Rod Holders offer quality all-metal, made in the U.S.A. construction. These rod holders can be used with spinning, casting and fly rods. Down-East Rod Holders are rated for light to moderate fishing of fish up to 25 pounds and for use with line up to 30 pound test. When a fish strikes, simply lift the rod straight up out of the rod holder. The are no releases to unclip or undo. We offer the D-10 "Down-Easter" Clamp Mount model and the D-11 Inboard Bracket Mount model.
$29.95
Scotty Model 346 Extended Rod Holder
(3)
The Scotty Model 346 Extended Rod Holder combines the Scotty 350 Rodmaster II Rod Holder, the 259 Height Extender (6 1/2" high) and the 344 water tight Round Flush Mount. The Scotty Model 346 Extended Rod Holder features reinforced nylon construction for strength, resilience and years of reliability. Mounting hardware is not included.
$28.95
Big Jon Single Multi-Set Rod Holder
(1)
The Big Jon Single Multi-Set Rod Holder adjusts to 9 positive locking positions with one hand. Heavy duty aluminium holder with attached base plate and dove-tailed "C" channel aluminum mounting track, with rubber end cap to protect rods. The holder comes with mounting hardware, allen wrench and instructions.
$84.95
Big Jon Single Heavy-Duty Deck Mount Rod Holder
The Big Jon Heavy-Duty Deck Mount Rod Holder is just that - a heavy duty holder which will give you years of use. This 13" rod holder adjusts to seven positive locking positions, with a spring loaded latch pin. It features an extra heavy duty rod holder, standard 4" by 4" mounting base, and a rubber end cap to protect your rods when putting them into or taking them out of the holder.
$129.95
Berkley Boat Rod Holder
(14)
The Berkley Boat Rod Holder (BRH) is the perfect accessory for those fishermen needing a simple, quick and easy solution for holding their fishing rods while the boat is anchored. This rod holder is made of corrosion proof, durable polyproplyene, and is fully adjustable horizontally and vertically. A rotating locking ring securely holds the rod in place. You will need mounting screws to affix this to your boat.
$14.95
Berkley Quick Set Rod Holder
(19)
Exclusive Quick Set design allows you to set the hook and remove your rod in one easy motion. Fully adjustable both horizontally and vertically, can be used with both spinning and casting rods. This rod holder can be mounted in several configurations, including flush mount, pedestal mount, side mount and rail mount. A double locking mechanism securely holds the rod and reel in place. The downward load of a lure or sinker keeps the rod secure.
$15.95
Scotty Model 230 Powerlock Rod Holder
(4)
The Scotty Model 230 Powerlock Rod Holder features multiple adjustments and easy rod access. The 230 is one of Scotty's most popular rod holders due to its extreme durability and great value. The 230 Powerlock Rod Holder is ideal for mid size rod and reels. Includes twelve positions of horizontal adjustment and six positions of vertical adjustment. The two way mounting bracket allows mounting of holder either on the top or side of the gunnel. Nylon and stainless steel construction.
$21.95