Email Sign Up
Free Economy Shipping Over $50.
'<' And '>' are not permitted
Fly & Spey Rods
Centerpin & Float Rods
Travel & Pack Rods
Centerpin & Float Reels
Centerpin & Float Combos
Travel & Pack Combos
Lures & Bait
Spinners & Spinnerbaits
Artificial & Prepared Baits & Attractants
Bait & Trolling Rigs
Braided & Super
Wire & Lead Core
Weights & Sinkers
Floats, Bobbers & Indicators
Swivels, Snaps & Split Rings
Crimps, Sleeves & Clevises
Fly & Spey Rods
Fly Fishing Outfits
Line, Leader & Tippet
Lures & Bait
Apparel & Wading
Fly Fishing Gear
Fly Fishing Accessories
Books & Videos
Apparel & Wading
Cleats & Spikes
Vests & Packs
Suits & Bibs
Jackets & Hoodies
Shirts & Tops
Pants & Shorts
Hats & Gloves
Shoes, Socks, & Belts
Eyewear & Accessories
Rod Holders & Track Systems
Drift Socks & Trolling Bags
Fish Cleaning & Processing
Rod & Reel Repair
Books & Videos
Fly Fishing Gear
Ice Fishing Gear
Shop By Brand
Salmon & Steelhead
Holiday Gift Guide
Refine Your Selection
Salmon & Steelhead
-- none --
Big Jon (9)
Black Marine Products (1)
Church Tackle (12)
Fish D Funk (2)
Fish Hawk (2)
Laurvick Releases (1)
Luhr Jensen (3)
Mason Tackle (1)
Off Shore Tackle (13)
Outdoor Scene (1)
Weldon Tackle (1)
Boat Electronic Accessories (3)
Downrigger Accessories (54)
Planer Board Accessories (27)
Diver Accessories (10)
Rod Holder Accessories (9)
Under $35 (69)
$35 - $70 (10)
$70 - $105 (7)
$105 - $140 (6)
Over $140 (3)
Salmon & Steelhead: Boat Accessories
A to Z
Z to A
List All Items
Weldon Planer Board Releases
Weldon Planer Board Releases are full-size and can be used with wire, monofilament or braided line. The inner tension spring on the clip can be moved to adjust the tension. These clips have fluorescent orange tape on both sides for greater visibility.
Church Tackle TX-12 Planer Board Flag System
Church Tackle TX-12 Planer Board Flag System was designed specifically to clip on to TX-12 planer boards. This system has 11 different settings which can be manipulated to increase your bite sensitivity greatly. Church Tackle TX-12 Planer Board Flag System uses tournament grade materials that can be used for fresh or salt water fishing. Use the Church Tackle TX-12 Planer Board Flag System to catch bass, striper, walleye, steelhead, panfish, bluegill, and crappie.
Scotty PowerGrip Plus Downrigger Release
The Scotty PowerGrip Plus Downrigger Release features a patented tension adjuster that doubles the holding power when needed. Its streamlined design will not snag on weeds or foul lines. The PowerGrip Plus Downrigger Release has soft pads that grip the line with variable release tension. Each package contains one release with an 18 inch heavy monofilament leader and cannonball snap.
Cooler-D-Funk Cleaning Formula
Cooler-D-Funk Cleaning Formula completely removes even the foulest cooler odors. This environmentally safe formula is great for all coolers and rinses clean with no residue. Whether your cooler was full of fish slime, meat blood, spoiled food, or just has that mildewy cooler smell, Cooler-D-Funk will kill the odors. Exclusive Double Down Technology neutralizes and counteracts stubborn odors for a fresh, clean smelling cooler. Cooler-D-Funk is also great for cleaning refrigerators and deodorizing...
$7.95 - $9.95
Boat-D-Funk Boat Cleaning Spray
Boat-D-Funk Boat Cleaning Spray will help clean and deodorize all your boat surfaces, including plastic, vinyl, canvas, carpet, brass, fiberglass, rubber, chrome, other metal, and more. This cleaning spray is environmentally friendly, with no harsh chemicals, and safe for your bait and live well. Easily remove fish smells and stains, mold, mildew, rust stains, dirt, grease, and more. Keep your boat clean and smelling fresh with the versatile Boat-D-Funk cleaning formula. Boat-D-Funk Boat Cleanin...
Outdoor Scene Downrigger Ball Release
The Outdoor Scene Downrigger Ball Release is made of high quality metal clamps and hand dipped for a tight grip. These releases feature and adjustable tension spring. Simply slide the spring to the rear for lighter release action or to the front for tighter release action. Each package contains one release attached to a 3 1/4" wire line with a cross-lock ball swivel. Total length is approximately 8 1/2". The Outdoor Scene Downrigger Ball Release is made in the U.S.A.
Laurvick Planer Board Releases
Laurvick Planer Board Releases are some of the original releases ever designed and still one of the best due to their durability, dependability, and quality. These releases won't snag on other lines or weeds and are easy to use. Laurvick Planer Board Releases have stainless steel and aluminum construction and have a patented tension adjuster. Each package contains six Laurvick Planer Board Releases. The Laurvick Planer Board Releases is made in the U.S.A.
$11.95 - $16.95
Church Tackle EZ-Store
The Church Tackle EZ-Store makes changing clips and storing planer boards quick and easy. After the Church Tackle EZ-Store is installed, you can slide your tow-arm/clip on and off in seconds. The EZ-Store fits the TX-44, Walleye, TX-22, and TX-12 models. Each package contains two clips. The Church Tackle EZ-Store is made in the U.S.A.
Church Tackle Flex Weight Clips
Church Tackle Flex Weight Clips are made of glass filled, extremely durable, nylon that will keep their shape if dropped or stepped on. The standard model has holes at the top and the bottom for attaching drop weights, allowing flexibility with your fishing environment. The adjustable model features a special plastic coating and are designed to hold ultra thin braids, lead core, or monofilament lines. The adjustable flex weight clip can easily be adjusted for different diameter lines. Each packa...
Church Tackle Replacement Planer Board Foam I...
Church Tackle Replacement Planer Board Foam Inserts are the replacement inserts for the Church Tackle Planer Boards. The model number for the inserts match the planer board they are compatible with. Each package contains one insert. Church Tackle Replacement Planer Board Foam Inserts are made in the U.S.A.
$2.95 - $6.45
Scotty PowerGrip Plus Planer Board Release Clips
The Scotty Power Grip Plus Planer Board Release Clips have a large easy to handle shape and a streamlined design so they won't snag on weeds or foul lines. These clips even allow you to double the holding power, if needed, with their patented tension adjuster. The Scotty Power Grip Plus Planer Board Release Clips come in a full size and a mini size model. The 4 1/4" model is black with yellow soft grip pads and comes 1 per pack, and the 2 1/4" model is yellow with yellow soft grip pads and come ...
$7.95 - $10.95
Big Jon Otter Boat's Half Weight Keel
The Big Jon Otter Boat's Half Weight Keel is made to use with the existing keel to help pull heavy lures, wire, and lead core lines. Your otter boat will be able to stay on track further away from your boat with the added weight. The Big Jon Otter Boat's Half Weight Keel comes with easy to follow instructions and all the hardware you will need to connect it. The Big Jon Otter Boat's Half Weight Keel is made in the U.S.A.
Big Jon 12 in. Vertical Gimbal Mounting Base
The Big Jon 12" Vertical Gimbal Mounting Base is an easy way to mount any Big Jon product that has a 4" x 4" base to your boat if it has a 90 degree flush gimbal mount rod holder. This mounting base easily slides into any gimbal holder and has a notched base to fit into the holder's pin, which prevents it from turning.
Bert's Custom Tackle Cap Kit for Rod Holder
The Bert's Custom Tackle Cap Kit for Rod Holder will fit all of Bert's tube style rod holders, as well as other standard 2" rod holders. Bert's rod holder caps are made of quality black plastic. The Bert's Custom Tackle Cap Kit includes 2 caps per pack.
Bert's Custom Tackle Tool Holder
The Bert's Custom Tackle Tool Holder has been redesigned with stronger materials and better cosmetics. This tool holder will keep your pliers, lures, and other tools close at hand. The Bert's Tool Holder is designed to fit into Bert's Track System (sold separately). This Bert's Tool Holder comes with a Black top and a stainless steel base.
Bert's Custom Tackle Step Pads for Track Systems
The Bert's Custom Tackle Step Pads for Track Systems are manufactured from UV resistant marine grade, heavy duty Starboard material. These Bert's custom non-slip step pads fit and lock securely into the Bert's Track System (sold Separately) allowing for safe transition to and from your boat. Use Bert's Custom Tackle step pads to maintain a clean look when not using our accessories. Made in USA.
$17.95 - $25.95
Bert's Custom Tackle Fixed Mount Downrigger Base
The Bert's Custom Tackle Fixed Mount Downrigger Base is constructed of stainless steel and anodized aluminum. This Berts Fixed Downrigger base is weather and corrosion resistant making it great for freshwater or saltwater applications. Berts Custom Tackle Fixed Mount Downrigger Base fits into the Bert's Track System (sold separately), and it is designed with pre-drilled holes to work with all downriggers.
Bert's Custom Tackle Swivel Mount Downrigger ...
The Bert's Custom Tackle Swivel Mount Downrigger Base features a 12 locking position gear block with positive lock stainless components. This Berts Swivel Mount base is fully adjustable, with the ability to rotate in a complete circle and lock at any 30 degree position. Bert's Swivel Mount Downrigger Base fits into the Bert's Track System (sold separately).
Bert's Custom Tackle Single Track System
The Bert's Custom Tackle Single Track System is an anodized aluminum track that can be mounted to any flat surface on your boat. Bert's Track System provides flexibility in adding and changing Bert's rod holders, downrigger bases, step pads, boating accessories and more! Berts Custom Tackle Track System is easy to install and includes mounting instructions, end caps, and hardware.
$33.95 - $124.95
Off Shore Tackle Replacement Guppy Weights
Off Shore Tackle Replacement Guppy Weights are great for snap weight and in line applications when trolling. These weights can be rigged using snap swivels, split rings, or the Off Shore Tackle OR16 Snap Weight Clip (sold separately). Guppy Weights contain less than 1% lead.
$3.65 - $4.75
Off Shore Tackle Replacement Brackets
Off Shore Tackle Replacement Brackets are to replace the brackets from your model OR34 Mini Planer Boards (sold separately). Each Off Shore Tackle Replacement Brackets package includes two brackets.
Off Shore Tackle Pigtail Swivels
Off Shore Tackle Pigtail Swivels are for when using the slide down method with your OR12 and OR31 planer boards. These pigtails replace the snap or coastlock swivels that come with most planer boards, and they allow you to quickly and easily attach the line to your planer boards.
Off Shore Tackle Replacement Tattle Flag Springs
Off Shore Tackle Replacement Tattle Flag Springs are a replacement spring for the OR12TF Tattle Flag (sold separately). This spring is compatible with the Tattle Flag Upgrade Kit, which is compatible with the model OR12 and OR31 planer boards.
Mason Downrigger Line Assembly
Mason Downrigger Line Assembly is kink resistant, stainless steel, multistrand wire. This replacement downrigger cable comes pre-rigged with an extra heavy duty cast snap and swivel secured with steel collars. We stock Mason Downrigger Line Assembly in 150 ft., 200 ft., and 300 ft. spools. Color is bright silver. Mason Downrigger Line Assembly is made in the U.S.A.
$15.95 - $25.95
Dreamweaver Planer Board Rip Cord
The Dreamweaver Planer Board Rip Cord acts as a shock absorber to help prevent damage to the mast system as well as to keep your planer boards from jumping in the waves. The Planer Board Rip Cords are constructed of a heavy duty plastic material with just the right amount of stretch. A barrel swivel is located on one end with a coast lock swivel at the other. The Dreamweaver Planer Board Rip Cords measure 40" in length. These are easily clipped in line with your planer board line and planer boar...
Off Shore Tackle OR20 Pro Weight System
The Off Shore Tackle OR20 Pro Weight System is used off of flat lines and side planer boards. This weight system is 99.9% lead free. The Off Shore Tackle OR20 Pro Weight System contains all the components necessary to be used as in-line weights or snap weights. The Guppy Weights feature a fish shaped design with tail to reduce line twist and ensure true tracking. The Off Shore Tackle OR20 Pro Weight System comes in a small plastic tackle box for easy convenient storage.
Off Shore Tackle Replacement Release Pads
The Off Shore Tackle Replacement Release Pads are the replacement pinch pads for Off Shore Tackle Releases. The Mini (ORRP16) Replacement Release Pads fit OR10, OR14 and OR19 releases as well as OR16 clips without the pin protruding through the center of the pad. The Standard (ORRP8) Replacement Release Pads fit OR1, OR2, OR3, OR4, OR7, OR8, OR17 and OR30 releases.
$3.45 - $4.25
Cannon Downrigger Mount Rod Holder - Silver
Cannon Downrigger Mount Rod Holder is a dual axis rod holder that mounts between the mounting base and swivel base of your Cannon downrigger for ultimate rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Rotates a full 360° for added versatility. Compatible with all Cannon downriggers (excluding Mini-Troll). These Cannon Rod Holders are 10" in length.
Cannon Aluminum Swivel Downrigger Pedestal Base
Cannon Aluminum Swivel Downrigger Pedestal Base features a sturdy Swivel base that works with either surface or track mounting, and comes in 4" or 6" heights. The Swivel Pedestal base also features 16-pt. locking indexes every 22.5 degrees and provides 360 degree rotation. The top plate is pre-drilled and tapped to allow mounting of a Cannon swivel base and downrigger, as well as other swivel base and downrigger brands.
$109.95 - $119.95
Cannon Stainless Steel Downrigger Gimbal Mount
Cannon Stainless Steel Gimbal mounts are polished stainless steel and enable you to mount your downrigger in 30° flush mount rod holders with these sturdy, corrosion-resistant mounts. We stock these Cannon Stainless Steel Gimbal Mounts in 9" and 12" sizes, measured from the bottom of the gimbal tube to the backside of the base. 1-1/2" O.D. Tube.
$99.95 - $104.95
Cannon Digi-Troll Transducer
Cannon Digi-Troll Transducer provides bottom tracking ability to Digi-Troll downriggers. Network up to six downriggers to troll at set distances from the bottom through this single transducer. Make your trolling more effective. Cannon part number 1491072.
Church Tackle Super Clips
Church Tackle Super Clips are made of stainless steel, making them durable and corrosion resistant. These clips feature an easy to use, spring loaded line clamp design. The standard clip is non-adjustable and the weight attaches only to the rear of the clip. The adjustable clip will hold ultra thin braids, lead core, and monofilament lines. The adjustable clip can be easily adjusted to any diameter line. Each package contains two clips. Church Tackle Super Clips are made in the U.S.A.
$13.95 - $14.95
PowerPro Spectra Downrigger Cable Replacement
PowerPro Spectra Downrigger Cable Replacement Line is not affected by salt water, UV rays, or most chemicals and solvents. PowerPro Spectra Downrigger Cable Replacement Line is a great alternative for running deep with trolling weights, planer devices, and downriggers (manual or electric). PowerPro delivers the sensitivity, strength, near zero stretch, and silence needed to catch more fish. PowerPro Spectra Downrigger Cable Replacement Line is composed of polyethylene, a very slick plastic. In f...
$25.95 - $57.95
Fish Hawk X4 Probe
The Fish Hawk X4 Probe is has been radically re-engineered with InvisTroll Technology that provides speed and water temperature at the depth of the downrigger ball. Compatible with X4 LCD systems and backwards compatible with Fish Hawk 840 and 800 systems. Works to depths of at least 200 feet. The Fish Hawk X4 Probe includes downrigger ball Safety Cable.
Fish Hawk X4 Triducer Replacement
The Fish Hawk X4 Triducer Replacement works with the Fish Hawk X4 or 840 systems. Mounting hardware is included.
Church Tackle Lighted Flag Kits
Church Tackle Lighted Flag Kits are for use with any of the Church Tackle Planer Board Systems. The Double Action Lighted Flag Kit can be attached to the double action system but does not contain the system. The Stationary Lighted Flag kit is in a fixed position. The lighted flags allow you, as well as other boaters, to spot your boards from several hundred feet away. A simple twist of the light clockwise turns the light on and a twist counterclockwise turns the light off. Batteries are included...
Church Tackle Single Line Release
The Church Tackle Single Line Release (40440) features a durable stainless steel cable. The clip is made of glass filled super tough nylon and coated with a special plastic. Unlike metal clips that will bend if dropped or stepped on, the flexible clip will revert back to the original shape. This line release features an easy to use, adjustable spring loaded line clamp design. The tension can be adjusted to accommodate different diameter lines. The Church Tackle Single Line Release is made in t...
Church Tackle Stacker Line Release
The Church Tackle Stacker Line Release features durable stainless steel cables and special plastic clips. The clips are made of glass filled super tough nylon and coated with a special plastic. Unlike metal clips that will bend if dropped or stepped on, the flexible clip will revert back to the original shape. This line release features an easy to use, adjustable spring loaded line clamp design. The tension can be adjusted to accommodate different diameter lines. The Church Tackle Stacker Line ...
Scotty Model 244 Flush Deck Mounting Bracket
Scotty Model 244 Flush Deck Mounting Bracket is for use with all Scotty post mount rod holders and accessories. The sealed base makes it great for water tight applications, such as kayak decks. The splash cover keeps water and other debris out of the mounting bracket. The Scotty Model 244 Flush Deck Mounting Bracket measures 4" x 2" x 2". Mounting hardware is not included. Black in color.
Church Tackle Lock-Jaw Clip
The Church Tackle Lock-Jaw Clip fits the TX-12, TX-22, TX-44 and the Walleye Board planer boards from Church Tackle. It is also designed to fit side planers made by other companies as well as drop-weights and many other applications. The replaceable pads hold great on all lines including mono, super braids, power pro, lead, wire, and copper lines while not damaging the line. The Church Tackle Lock-Jaw Clip is designed without a spring that could possibly weaken or lose tension. The clip clamps d...
We're sorry, we couldn't find any results that met your criteria
Reduce the number of keywords used, or use more general words.
Remember to use the full name, not just an acronym.
Try one of the keyword suggestions that are displayed as you type in the main search input and then use the filters to narrow the results.
You could also try browsing by:
Stay updated on
new items & sales
You have not entered an email address. Please check your spelling.
Order Tracking & History
Shipping Rates & Times
Order by Mail
Sales & Security Policy
Terms & Conditions
Forums & Regional Sites
© 2015 FishUSA, Inc.